The post Husqvarna T540 XP Mark III Chainsaw 14″ #970510014 appeared first on Safford Equipment Company.

The post Husqvarna 592XPG Chainsaw 24″ #970493454 appeared first on Safford Equipment Company.

The post Husqvarna 592XPG Chainsaw 28″ #970493458 appeared first on Safford Equipment Company.

Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 36V (18V X2) LXT® Brushless 16” Chain Saw (XCU04CM). With zero emissions, lower noise, and considerably less maintenance, the XCU04CM is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® 4.0Ah Batteries for maximum power, speed and run-time. And with the efficient Makita® outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a 32cc gas chain saw.

The XCU04CM has a 16” guide bar and the Makita-built outer rotor brushless motor direct drive system motor with variable speed delivers 0-3,940 FPM for increased cutting speed. It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion Batteries, and the saw is ready to use. Convenience features include a tool-less chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

It’s part of Makita’s expanding 18V LXT System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita® 18V LXT® Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

The post Makita 18V x 2 LXT 16″ Chainsaw Kit #XCU04CM appeared first on Safford Equipment Company.

Features
X-Torq®
The powerful and efficient X-Torq® engine cuts both engine emissions and fuel consumption, improving your working environment and saving you money at the gas pump.

Adjustable oil pump
Allows you to control oil flow depending on application and weather conditions.

Quick-release air filter
Facilitates cleaning and replacement of the air filter.

Chain tensioning from the side
Allows quick and convenient chain tensioning.

Quick release air filter cover
Quick release cover saves time when cleaning or changing spark plug or filter.

LowVib®
System designed to reduce vibration levels to the operator, which lessens fatigue.

Chain break window
Improved design allows for better visibility of the guide bar tip.

Rope attachment
A sturdy point for fastening a rope, making it easy to hoist the saw up into a tree.

Chain break window
Improved design allows for better visibility of the guide bar tip.

Rope attachment
A sturdy point for fastening a rope, making it easy to hoist the saw up into a tree.

Inertia-Activated Chain Brake
Reduces the likelihood of injury due to kickback.

Easier cold starting
Starting a cold engine requires less effort thanks to the air purge.

Flip-up tank cap
The flip-up tank cap is easy to open.

Smart Start®
The engine and starter have been designed so the machine starts quickly with minimum effort.

Specifications:

T435 Art no.: 966997232

Engine:
Power Output: 2.01 hp
Cylinder Displacement: 2.15 cu.inch
Maximum Power Speed: 10,000 rpm
Max Engine/Motor: 12,500 rpm
Idling Speed: 2,900 rpm
Torque, Max.: 1.57 Nm
Torque, Max. at rpm: 7,500 rpm
Clutch Engagement Speed (±120): 4,700 rpm
Fuel Consumption: 408 g/kWh
Spark Plug: NGK CMR6H
Electrode Gap: 0.03 in
Ignition Module Air Gap: 0.02 in
Oil Pump Type: Automatic
Oil Pump Capacity, Max: 9 ml/min
Oil Pump Capacity, Min: 3 ml/min

Emission:
Exhaust Emissions (CO2 EU V): 860 g/kWh

Equipment:
Bar Length (inch): 12 in
Recommended Bar Length, Min: 12 in
Recommended Bar Length, Max: 14 in
Chain Type: H37
Gauge: .050”
Pitch: ⅜” mini
Sprocket Type: Spur 6

Dimensions
Weight (excl. cutting equipment): 7.5 lbs

Lubricant:
Lubricant Type (Engine): Husqvarna 2 Stroke or Equiv. At 50:1
Oil Tank Volume: 0.36 US pint
Oil Tank Volume: 0.17 l

Sound and Noise:
Sound Power Level, Guaranteed (LWA): 114 dB(A)
Sound Power Level, Measured: 112 dB(A)
Sound Pressure Level at Operators Ear: 103 dB(A)

Vibration:
Equivalent Vibration Level (ahv, eq) Front Handle” 3.6 m/s²
Equivalent Vibration Level (ahv, eq) Rear Handle: 3.9 m/s²

The post Husqvarna T435 Chainsaw 12″ #966997232 appeared first on Safford Equipment Company.

Features
X-Torq®
The powerful and efficient X-Torq® engine cuts both engine emissions and fuel consumption, improving your working environment and saving you money at the gas pump.

Adjustable oil pump
Allows you to control oil flow depending on application and weather conditions.

Quick-release air filter
Facilitates cleaning and replacement of the air filter.

Chain tensioning from the side
Allows quick and convenient chain tensioning.

Quick release air filter cover
Quick release cover saves time when cleaning or changing spark plug or filter.

LowVib®
System designed to reduce vibration levels to the operator, which lessens fatigue.

Chain break window
Improved design allows for better visibility of the guide bar tip.

Rope attachment
A sturdy point for fastening a rope, making it easy to hoist the saw up into a tree.

Chain break window
Improved design allows for better visibility of the guide bar tip.

Rope attachment
A sturdy point for fastening a rope, making it easy to hoist the saw up into a tree.

Inertia-Activated Chain Brake
Reduces the likelihood of injury due to kickback.

Easier cold starting
Starting a cold engine requires less effort thanks to the air purge.

Flip-up tank cap
The flip-up tank cap is easy to open.

Smart Start®
The engine and starter have been designed so the machine starts quickly with minimum effort.

Specifications:

T435 Art no.: 966997234

Engine:
Power Output: 2.01 hp
Cylinder Displacement: 2.15 cu.inch
Maximum Power Speed: 10,000 rpm
Max Engine/Motor: 12,500 rpm
Idling Speed: 2,900 rpm
Torque, Max.: 1.57 Nm
Torque, Max. at rpm: 7,500 rpm
Clutch Engagement Speed (±120): 4,700 rpm
Fuel Consumption: 408 g/kWh
Spark Plug: NGK CMR6H
Electrode Gap: 0.03 in
Ignition Module Air Gap: 0.02 in
Oil Pump Type: Automatic
Oil Pump Capacity, Max: 9 ml/min
Oil Pump Capacity, Min: 3 ml/min

Emission:
Exhaust Emissions (CO2 EU V): 860 g/kWh

Equipment:
Bar Length (inch): 14 in
Recommended Bar Length, Min: 12 in
Recommended Bar Length, Max: 14 in
Chain Type: H37
Gauge: .050”
Pitch: ⅜” mini
Sprocket Type: Spur 6

Dimensions
Weight (excl. cutting equipment): 7.5 lbs

Lubricant:
Lubricant Type (Engine): Husqvarna 2 Stroke or Equiv. At 50:1
Oil Tank Volume: 0.36 US pint
Oil Tank Volume: 0.17 l

Sound and Noise:
Sound Power Level, Guaranteed (LWA): 114 dB(A)
Sound Power Level, Measured: 112 dB(A)
Sound Pressure Level at Operators Ear: 103 dB(A)

Vibration:
Equivalent Vibration Level (ahv, eq) Front Handle” 3.6 m/s²
Equivalent Vibration Level (ahv, eq) Rear Handle: 3.9 m/s²

The post Husqvarna T435 Chainsaw 14″ #966997234 appeared first on Safford Equipment Company.

Experience the power of our new 90cc petrol chainsaw range! Husqvarna 592 XP® is developed for professional forestry and tree care workers who demand the best in heavy-duty performance, reliable operation, and well-balanced maneuverability. Featuring AutoTune 3.0, this chainsaw starts easily and runs optimally in all conditions. The powerful X-Torq engine combined with the X-Cut C85/C83 chains delivers best-in-class cutting capacity and power-to-weight. Equipped with X-Tough or X-Tough Light bar, available from 20” to 36”.

Features

Best-in-class cutting capacity

The 592 XP® delivers best-in-class* cutting capacity. The chainsaw’s dominant performance is due to the combination of an extremely powerful X-Torq® engine and the razor-sharp C85 or C83 X-Cut® chain, which makes the user better and faster while providing an improved cutting experience. (*When compared to closest competitor in the same displacement class, Stihl MS 661 C-M.)

Best-in-class power-to-weight ratio

The 592 XP® offers an unbeatable combination of low weight and high power that makes you more efficient while you work. The chainsaw’s perfect balance is the result of an optimized center of gravity as well as the X-Tough Light bar, which together ensure easier maneuvering and better efficiency.

Easy starts and maximum reliability

The starting procedure is simplified and only one starting procedure is required no matter the conditions or temperature of the engine, which further improves the chainsaw’s reliability. Additionally, the saw is equipped with a heavy-duty air filter with rubber sealing and a robust crankcase that handles guide bars up to 36″.

Always optimized

Thanks to AutoTune 3.0, the engine settings are always optimized for maximum startability and performance in all conditions, keeping you going no matter the challenges with no need for manual carburetor adjustments.

Service connector

Easier diagnostics means quicker and better service at the dealer. The service connector allows the technician to connect your saw to the digital service tool and perform all vital checks in no time.

Connectivity ready

Keep your chainsaw and yourself up to date with Husqvarna’s digital services. Optionally plug in the Integrated Connectivity Device under the cylinder cover and you’ll be ready to connect and diagnose any issues with the engine.Optimal chip ejection avoids clogging

The clutch cover is designed to optimize rapid, safe saw chip ejection. Prevents clogging, even when cutting long-fibre wood.

Lightweight muffler

A lightweight muffler contributes to the chainsaw’s lower overall weight, which ensures comfort and efficiency without sacrificing performance.

Retained bar nuts

A handy retaining function reduces the chance of losing the guide bar nuts.

Flip-up tank caps

Flip-up fuel tank caps are easy to open and secure firmly, even when wearing thick winter gloves.

Equipped with state-of-the-art filtration system

Chainsaw comes equipped with a heavy-duty filter for longer and better filtration via a larger filtration area compared to previous designs. Ensures a healthier engine that’s optimized for long working hours.

Air Injection filters 98% of incoming dust

The Air Injection feature on the chainsaw filters 98% of incoming sawdust, grit and dirt to reduce the amount of air filter cleanings and ensure high performance at all times.

Retained starter screws

A retaining function prevents the accidental loss of the screws holding the starter.

Fast acceleration

Engine parts are designed to be low weight and optimized for faster acceleration.

Felling sight to last a lifetime

Having a perfect sight is critical when using a chainsaw – so we made one that’s permanently molded into the chainsaw for long-lasting felling accuracy.

Visible fuel level

The large transparent tank window makes it quick and easy to check the fuel level at a glance without opening the fuel tank’s lid.

X-Torq®

The powerful and efficient X-Torq® engine cuts both engine emissions and fuel consumption, improving your working environment and saving you money at the gas pump.

The post Husqvarna 592XP Chainsaw 36″ W/ Light Weight Bar #970493146 appeared first on Safford Equipment Company.

Experience the power of our new 90cc petrol chainsaw range! Husqvarna 592 XP® is developed for professional forestry and tree care workers who demand the best in heavy-duty performance, reliable operation, and well-balanced maneuverability. Featuring AutoTune 3.0, this chainsaw starts easily and runs optimally in all conditions. The powerful X-Torq engine combined with the X-Cut C85/C83 chains delivers best-in-class cutting capacity and power-to-weight. Equipped with X-Tough or X-Tough Light bar, available from 20” to 36”.

Features

Best-in-class cutting capacity

The 592 XP® delivers best-in-class* cutting capacity. The chainsaw’s dominant performance is due to the combination of an extremely powerful X-Torq® engine and the razor-sharp C85 or C83 X-Cut® chain, which makes the user better and faster while providing an improved cutting experience. (*When compared to closest competitor in the same displacement class, Stihl MS 661 C-M.)

Best-in-class power-to-weight ratio

The 592 XP® offers an unbeatable combination of low weight and high power that makes you more efficient while you work. The chainsaw’s perfect balance is the result of an optimized center of gravity as well as the X-Tough Light bar, which together ensure easier maneuvering and better efficiency.

Easy starts and maximum reliability

The starting procedure is simplified and only one starting procedure is required no matter the conditions or temperature of the engine, which further improves the chainsaw’s reliability. Additionally, the saw is equipped with a heavy-duty air filter with rubber sealing and a robust crankcase that handles guide bars up to 36″.

Always optimized

Thanks to AutoTune 3.0, the engine settings are always optimized for maximum startability and performance in all conditions, keeping you going no matter the challenges with no need for manual carburetor adjustments.

Service connector

Easier diagnostics means quicker and better service at the dealer. The service connector allows the technician to connect your saw to the digital service tool and perform all vital checks in no time.

Connectivity ready

Keep your chainsaw and yourself up to date with Husqvarna’s digital services. Optionally plug in the Integrated Connectivity Device under the cylinder cover and you’ll be ready to connect and diagnose any issues with the engine.Optimal chip ejection avoids clogging

The clutch cover is designed to optimize rapid, safe saw chip ejection. Prevents clogging, even when cutting long-fibre wood.

Lightweight muffler

A lightweight muffler contributes to the chainsaw’s lower overall weight, which ensures comfort and efficiency without sacrificing performance.

Retained bar nuts

A handy retaining function reduces the chance of losing the guide bar nuts.

Flip-up tank caps

Flip-up fuel tank caps are easy to open and secure firmly, even when wearing thick winter gloves.

Equipped with state-of-the-art filtration system

Chainsaw comes equipped with a heavy-duty filter for longer and better filtration via a larger filtration area compared to previous designs. Ensures a healthier engine that’s optimized for long working hours.

Air Injection filters 98% of incoming dust

The Air Injection feature on the chainsaw filters 98% of incoming sawdust, grit and dirt to reduce the amount of air filter cleanings and ensure high performance at all times.

Retained starter screws

A retaining function prevents the accidental loss of the screws holding the starter.

Fast acceleration

Engine parts are designed to be low weight and optimized for faster acceleration.

Felling sight to last a lifetime

Having a perfect sight is critical when using a chainsaw – so we made one that’s permanently molded into the chainsaw for long-lasting felling accuracy.

Visible fuel level

The large transparent tank window makes it quick and easy to check the fuel level at a glance without opening the fuel tank’s lid.

X-Torq®

The powerful and efficient X-Torq® engine cuts both engine emissions and fuel consumption, improving your working environment and saving you money at the gas pump.

The post Husqvarna 592XP Chainsaw 32″ W/ Light Weight Bar #970493142 appeared first on Safford Equipment Company.

Experience the power of our new 90cc petrol chainsaw range! Husqvarna 592 XP® is developed for professional forestry and tree care workers who demand the best in heavy-duty performance, reliable operation, and well-balanced maneuverability. Featuring AutoTune 3.0, this chainsaw starts easily and runs optimally in all conditions. The powerful X-Torq engine combined with the X-Cut C85/C83 chains delivers best-in-class cutting capacity and power-to-weight. Equipped with X-Tough or X-Tough Light bar, available from 20” to 36”.

Features

Best-in-class cutting capacity

The 592 XP® delivers best-in-class* cutting capacity. The chainsaw’s dominant performance is due to the combination of an extremely powerful X-Torq® engine and the razor-sharp C85 or C83 X-Cut® chain, which makes the user better and faster while providing an improved cutting experience. (*When compared to closest competitor in the same displacement class, Stihl MS 661 C-M.)

Best-in-class power-to-weight ratio

The 592 XP® offers an unbeatable combination of low weight and high power that makes you more efficient while you work. The chainsaw’s perfect balance is the result of an optimized center of gravity as well as the X-Tough Light bar, which together ensure easier maneuvering and better efficiency.

Easy starts and maximum reliability

The starting procedure is simplified and only one starting procedure is required no matter the conditions or temperature of the engine, which further improves the chainsaw’s reliability. Additionally, the saw is equipped with a heavy-duty air filter with rubber sealing and a robust crankcase that handles guide bars up to 36″.

Always optimized

Thanks to AutoTune 3.0, the engine settings are always optimized for maximum startability and performance in all conditions, keeping you going no matter the challenges with no need for manual carburetor adjustments.

Service connector

Easier diagnostics means quicker and better service at the dealer. The service connector allows the technician to connect your saw to the digital service tool and perform all vital checks in no time.

Connectivity ready

Keep your chainsaw and yourself up to date with Husqvarna’s digital services. Optionally plug in the Integrated Connectivity Device under the cylinder cover and you’ll be ready to connect and diagnose any issues with the engine.Optimal chip ejection avoids clogging

The clutch cover is designed to optimize rapid, safe saw chip ejection. Prevents clogging, even when cutting long-fibre wood.

Lightweight muffler

A lightweight muffler contributes to the chainsaw’s lower overall weight, which ensures comfort and efficiency without sacrificing performance.

Retained bar nuts

A handy retaining function reduces the chance of losing the guide bar nuts.

Flip-up tank caps

Flip-up fuel tank caps are easy to open and secure firmly, even when wearing thick winter gloves.

Equipped with state-of-the-art filtration system

Chainsaw comes equipped with a heavy-duty filter for longer and better filtration via a larger filtration area compared to previous designs. Ensures a healthier engine that’s optimized for long working hours.

Air Injection filters 98% of incoming dust

The Air Injection feature on the chainsaw filters 98% of incoming sawdust, grit and dirt to reduce the amount of air filter cleanings and ensure high performance at all times.

Retained starter screws

A retaining function prevents the accidental loss of the screws holding the starter.

Fast acceleration

Engine parts are designed to be low weight and optimized for faster acceleration.

Felling sight to last a lifetime

Having a perfect sight is critical when using a chainsaw – so we made one that’s permanently molded into the chainsaw for long-lasting felling accuracy.

Visible fuel level

The large transparent tank window makes it quick and easy to check the fuel level at a glance without opening the fuel tank’s lid.

X-Torq®

The powerful and efficient X-Torq® engine cuts both engine emissions and fuel consumption, improving your working environment and saving you money at the gas pump.

The post Husqvarna 592XP Chainsaw 28″ W/ Light Weight Bar #970493158 appeared first on Safford Equipment Company.

Experience the power of our new 90cc petrol chainsaw range! Husqvarna 592 XP® is developed for professional forestry and tree care workers who demand the best in heavy-duty performance, reliable operation, and well-balanced maneuverability. Featuring AutoTune 3.0, this chainsaw starts easily and runs optimally in all conditions. The powerful X-Torq engine combined with the X-Cut C85/C83 chains delivers best-in-class cutting capacity and power-to-weight. Equipped with X-Tough or X-Tough Light bar, available from 20” to 36”.

Features

Best-in-class cutting capacity

The 592 XP® delivers best-in-class* cutting capacity. The chainsaw’s dominant performance is due to the combination of an extremely powerful X-Torq® engine and the razor-sharp C85 or C83 X-Cut® chain, which makes the user better and faster while providing an improved cutting experience. (*When compared to closest competitor in the same displacement class, Stihl MS 661 C-M.)

Best-in-class power-to-weight ratio

The 592 XP® offers an unbeatable combination of low weight and high power that makes you more efficient while you work. The chainsaw’s perfect balance is the result of an optimized center of gravity as well as the X-Tough Light bar, which together ensure easier maneuvering and better efficiency.

Easy starts and maximum reliability

The starting procedure is simplified and only one starting procedure is required no matter the conditions or temperature of the engine, which further improves the chainsaw’s reliability. Additionally, the saw is equipped with a heavy-duty air filter with rubber sealing and a robust crankcase that handles guide bars up to 36″.

Always optimized

Thanks to AutoTune 3.0, the engine settings are always optimized for maximum startability and performance in all conditions, keeping you going no matter the challenges with no need for manual carburetor adjustments.

Service connector

Easier diagnostics means quicker and better service at the dealer. The service connector allows the technician to connect your saw to the digital service tool and perform all vital checks in no time.

Connectivity ready

Keep your chainsaw and yourself up to date with Husqvarna’s digital services. Optionally plug in the Integrated Connectivity Device under the cylinder cover and you’ll be ready to connect and diagnose any issues with the engine.Optimal chip ejection avoids clogging

The clutch cover is designed to optimize rapid, safe saw chip ejection. Prevents clogging, even when cutting long-fibre wood.

Lightweight muffler

A lightweight muffler contributes to the chainsaw’s lower overall weight, which ensures comfort and efficiency without sacrificing performance.

Retained bar nuts

A handy retaining function reduces the chance of losing the guide bar nuts.

Flip-up tank caps

Flip-up fuel tank caps are easy to open and secure firmly, even when wearing thick winter gloves.

Equipped with state-of-the-art filtration system

Chainsaw comes equipped with a heavy-duty filter for longer and better filtration via a larger filtration area compared to previous designs. Ensures a healthier engine that’s optimized for long working hours.

Air Injection filters 98% of incoming dust

The Air Injection feature on the chainsaw filters 98% of incoming sawdust, grit and dirt to reduce the amount of air filter cleanings and ensure high performance at all times.

Retained starter screws

A retaining function prevents the accidental loss of the screws holding the starter.

Fast acceleration

Engine parts are designed to be low weight and optimized for faster acceleration.

Felling sight to last a lifetime

Having a perfect sight is critical when using a chainsaw – so we made one that’s permanently molded into the chainsaw for long-lasting felling accuracy.

Visible fuel level

The large transparent tank window makes it quick and easy to check the fuel level at a glance without opening the fuel tank’s lid.

X-Torq®

The powerful and efficient X-Torq® engine cuts both engine emissions and fuel consumption, improving your working environment and saving you money at the gas pump.

The post Husqvarna 592XP Chainsaw 36″ #970493156 appeared first on Safford Equipment Company.